Transparent finish
Preserves visible wood texture and decorative appearance instead of covering the surface with a heavy opaque layer.
Fireproof Coating
Transparent Intumescent Fireproof Coating for Wood
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Présentation du produit
Présentation du produit
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Product System
Transparent Intumescent Fireproof Coating for Wood
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Core Advantages
Intumescent protection
Forms a carbonized insulation layer under heat to slow flame spread on timber substrates.
Interior-friendly system
Water-based, low-odor application for wood panels, battens, furniture and interior fit-out projects.
Technical Parameters
| Main substrate | Solid wood, veneer, plywood, decorative panels and timber battens |
|---|---|
| Finish | Clear or lightly tinted transparent protective film |
| Application method | Brush, roller or spray with controlled coats |
| Acceptance focus | Transparency, adhesion, film continuity and fireproof documentation |
| Certification Support | CE / RoHS / ASTM / EN documentation support |
| Construction Control | Confirm substrate preparation, primer compatibility, wet film thickness and curing condition before batch application. |
Application Scenes
Application Scenes
REFERENCE TDS DATA
Wood Fireproof Coating Reference Data
Key product and construction data below is extracted from the June 2026 TFRCWP transparent wood intumescent coating guide and the single-component waterborne wood fireproof coating TDS.
Core Features
Protection intumescente à l'eau
Système ignifuge intumescent à résine aqueuse pour bois massif, contreplaqué, MDF, tasseaux et finitions intérieures ; forme une couche carbonée isolante en cas de feu.
Effet décoratif bois naturel
Le système transparent bicomposant révèle le veinage naturel ; la version opaque monocomposant accepte des teintes claires pour concilier feu et décoration.
Système bas COV conforme export
COV≤300 g/L et solides≥85 %, faible odeur ; certifications CE et RoHS avec dossier d'essais en langues étrangères pour projets bois locaux et export.
Technical Parameters
| TFRCWP mixing ratio | A component : B component : clean water = 1.5 : 1 : 1 by volume |
|---|---|
| Pot life | Use the mixed TFRCWP material within 6 hours |
| Recommended dry film | TFRCWP total dry film >=500 um; single-component wood coating recommended dry film 0.8-1.0 mm |
| Drying / curing | TFRCWP surface dry about 4 h and full cure 48 h; single-component wood coating surface dry <=3 h and through dry <=22 h |
| Wood moisture | TFRCWP wood moisture 12%-15%; single-component wood version recommends <=12% |
| Reference standards | GB12441 wood fireproof standard and EN13501 B-class fire-retardant positioning |
Application Fields
Solid wood, plywood, MDF, timber battens, decorative wood panels, indoor timber structures, furniture, hotels, villas and commercial interior wood components.
Product Advantages
Combines intumescent fire protection, waterborne low-odor application, wood-substrate adhesion and export documentation support while keeping decorative timber surfaces practical for commercial interiors.
Construction Instructions
- Clean, dry and sand the wood surface; remove dust, wax, oil and old unstable coatings before application.
- TFRCWP: mix A component, B component and clean water in the specified ratio, rest for 30 minutes, stir again and filter through an 80-mesh screen before brushing or spraying.
- Apply multiple controlled coats. For TFRCWP, each dry film coat is about 250 um and recoating starts after surface dry. Outdoor use must add a weather-resistant / UV topcoat.
Paramètres techniques
Paramètres techniques
- Application
- Timber buildings, interior wood finishes, furniture, battens, beams and decorative panels
- Niveau de performance
- Confirmed by EN 13501 project class and applied film thickness
- Support adapté
- Dry, clean and sanded solid wood, plywood, veneer and timber components
- Système recommandé
- Transparent fireproof primer + transparent intumescent finish, with optional clear topcoat
- Caractéristiques
- Clear finish, natural grain retention, fire expansion, water-based formula and indoor decoration suitability
- Certifications
- Devis projet
- Devis selon surface, épaisseur, emballage et port de destination
- Échantillons
- Échantillons payants et dossier technique disponibles
- Personnalisation emballage
- Support OEM/ODM couleur, étiquette, emballage et documents export
Notes d'application
Notes d'application
01
Confirm wood moisture and surface cleanliness first. Remove old coatings, wax, oil and dust.
02
Prepare a sample to check transparency, color change and consumption before brushing or spraying.
03
After drying, inspect clarity, uniformity, film thickness and fire-rating documents.
Articles techniques associés
Articles techniques associés
Produits associés
Produits associés
Revêtement intumescent coupe-feu pour structure acier
Le revêtement ignifuge intumescent à l'eau Bright Sun pour structures acier est un matériau de protection feu de niveau ingénierie pour éléments porteurs intérieurs et extérieurs. À base de résine écologique à l'eau, sans solvants fortement volatils, il s'applique facilement et permet un contrôle précis de l'épaisseur sèche ; sous flamme et forte chaleur, il mousse rapidement et forme une couche carbonée isolante dense et stable, ralentissant l'échauffement de l'acier et aidant à maintenir la capacité portante. Les performances feu sont vérifiées par GB 14907, ASTM E119 et EN 13501. Il convient aux stades, centres d'exposition, charpentes d'usines et bâtiments acier, avec rapports d'essai, documents douaniers et assistance complète pour chantiers locaux et export.
Peinture époxy anticorrosion à base d'eau
Waterborne Epoxy Anticorrosive Paint is built for steel structures, pipelines and chemical equipment that need water-based corrosion protection with practical site application and export project support.
Peinture de sol époxy à base d'eau
Waterborne Epoxy Floor Paint provides a clean, hard-wearing industrial floor coating system for factories, warehouses, parking garages and laboratories.