Transparent finish
Preserves visible wood texture and decorative appearance instead of covering the surface with a heavy opaque layer.
Fireproof Coating
Transparent Intumescent Fireproof Coating for Wood
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Descripción del producto
Descripción del producto
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Product System
Transparent Intumescent Fireproof Coating for Wood
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Core Advantages
Intumescent protection
Forms a carbonized insulation layer under heat to slow flame spread on timber substrates.
Interior-friendly system
Water-based, low-odor application for wood panels, battens, furniture and interior fit-out projects.
Technical Parameters
| Main substrate | Solid wood, veneer, plywood, decorative panels and timber battens |
|---|---|
| Finish | Clear or lightly tinted transparent protective film |
| Application method | Brush, roller or spray with controlled coats |
| Acceptance focus | Transparency, adhesion, film continuity and fireproof documentation |
| Certification Support | CE / RoHS / ASTM / EN documentation support |
| Construction Control | Confirm substrate preparation, primer compatibility, wet film thickness and curing condition before batch application. |
Application Scenes
Application Scenes
REFERENCE TDS DATA
Wood Fireproof Coating Reference Data
Key product and construction data below is extracted from the June 2026 TFRCWP transparent wood intumescent coating guide and the single-component waterborne wood fireproof coating TDS.
Core Features
Protección intumescente al agua
Sistema intumescente de resina al agua para madera maciza, contrachapado, MDF, rastreles y acabados interiores; ante fuego forma una capa carbonosa aislante que protege la estructura de madera.
Efecto decorativo de veta natural
El sistema transparente de dos componentes muestra la veta natural; la versión de color sólido de un componente admite tonos claros, logrando protección contra fuego y decoración a la vez.
Sistema bajo VOC para exportación
VOC≤300 g/L y sólidos≥85%, bajo olor y menor impacto ambiental; con certificación CE y RoHS y documentación técnica multilingüe para proyectos nacionales y de exportación.
Technical Parameters
| TFRCWP mixing ratio | A component : B component : clean water = 1.5 : 1 : 1 by volume |
|---|---|
| Pot life | Use the mixed TFRCWP material within 6 hours |
| Recommended dry film | TFRCWP total dry film >=500 um; single-component wood coating recommended dry film 0.8-1.0 mm |
| Drying / curing | TFRCWP surface dry about 4 h and full cure 48 h; single-component wood coating surface dry <=3 h and through dry <=22 h |
| Wood moisture | TFRCWP wood moisture 12%-15%; single-component wood version recommends <=12% |
| Reference standards | GB12441 wood fireproof standard and EN13501 B-class fire-retardant positioning |
Application Fields
Solid wood, plywood, MDF, timber battens, decorative wood panels, indoor timber structures, furniture, hotels, villas and commercial interior wood components.
Product Advantages
Combines intumescent fire protection, waterborne low-odor application, wood-substrate adhesion and export documentation support while keeping decorative timber surfaces practical for commercial interiors.
Construction Instructions
- Clean, dry and sand the wood surface; remove dust, wax, oil and old unstable coatings before application.
- TFRCWP: mix A component, B component and clean water in the specified ratio, rest for 30 minutes, stir again and filter through an 80-mesh screen before brushing or spraying.
- Apply multiple controlled coats. For TFRCWP, each dry film coat is about 250 um and recoating starts after surface dry. Outdoor use must add a weather-resistant / UV topcoat.
Parámetros técnicos
Parámetros técnicos
- Aplicación
- Timber buildings, interior wood finishes, furniture, battens, beams and decorative panels
- Nivel de desempeño
- Confirmed by EN 13501 project class and applied film thickness
- Sustrato adecuado
- Dry, clean and sanded solid wood, plywood, veneer and timber components
- Sistema recomendado
- Transparent fireproof primer + transparent intumescent finish, with optional clear topcoat
- Características
- Clear finish, natural grain retention, fire expansion, water-based formula and indoor decoration suitability
- Certificaciones
- Cotización del proyecto
- Cotización según área, espesor, embalaje y puerto de destino
- Soporte de muestras
- Muestras pagadas y documentos técnicos disponibles
- Personalización de embalaje
- Soporte OEM/ODM para color, etiqueta, embalaje y documentos
Notas de aplicación
Notas de aplicación
01
Confirm wood moisture and surface cleanliness first. Remove old coatings, wax, oil and dust.
02
Prepare a sample to check transparency, color change and consumption before brushing or spraying.
03
After drying, inspect clarity, uniformity, film thickness and fire-rating documents.
Artículos técnicos relacionados
Artículos técnicos relacionados
Productos relacionados
Productos relacionados
Recubrimiento ignífugo intumescente para estructura de acero
El recubrimiento ignífugo intumescente al agua Bright Sun para estructuras de acero es un material de protección contra incendios de grado ingeniería para elementos portantes interiores y exteriores. Con resina ecológica al agua como base, no contiene solventes de alta volatilidad, se aplica con facilidad y permite controlar con precisión el espesor de película seca; ante llama y alta temperatura se expande rápidamente y forma una capa carbonosa aislante, densa y estable, que retrasa el aumento de temperatura del acero y ayuda a mantener la capacidad portante. Su resistencia al fuego está verificada por GB 14907, ASTM E119 y EN 13501. Se adapta a estadios, centros de exposiciones, naves industriales y edificios metálicos, con informes de ensayo, documentación aduanera y soporte integral para obras nacionales y exportación de estructuras de acero.
Pintura epoxi anticorrosiva al agua
Waterborne Epoxy Anticorrosive Paint is built for steel structures, pipelines and chemical equipment that need water-based corrosion protection with practical site application and export project support.
Pintura epoxi para pisos al agua
Waterborne Epoxy Floor Paint provides a clean, hard-wearing industrial floor coating system for factories, warehouses, parking garages and laboratories.