Transparent finish
Preserves visible wood texture and decorative appearance instead of covering the surface with a heavy opaque layer.
Fireproof Coating
Transparent Intumescent Fireproof Coating for Wood
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Product Overview
Product Overview
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Product System
Transparent Intumescent Fireproof Coating for Wood
Transparent Intumescent Fireproof Coating for Wood keeps the natural wood grain visible while adding intumescent fire protection for decorative timber, furniture and commercial interiors.
Core Advantages
Intumescent protection
Forms a carbonized insulation layer under heat to slow flame spread on timber substrates.
Interior-friendly system
Water-based, low-odor application for wood panels, battens, furniture and interior fit-out projects.
Technical Parameters
| Main substrate | Solid wood, veneer, plywood, decorative panels and timber battens |
|---|---|
| Finish | Clear or lightly tinted transparent protective film |
| Application method | Brush, roller or spray with controlled coats |
| Acceptance focus | Transparency, adhesion, film continuity and fireproof documentation |
| Certification Support | CE / RoHS / ASTM / EN documentation support |
| Construction Control | Confirm substrate preparation, primer compatibility, wet film thickness and curing condition before batch application. |
Application Scenes
Application Scenes
REFERENCE TDS DATA
Wood Fireproof Coating Reference Data
Key product and construction data below is extracted from the June 2026 TFRCWP transparent wood intumescent coating guide and the single-component waterborne wood fireproof coating TDS.
Core Features
Water-based Intumescent Protection
A water-based resin intumescent flame-retardant system for solid wood, plywood, MDF, timber battens and indoor wood finishes. It forms an insulating char layer under fire to protect interior timber structures.
Natural Wood-grain Decorative Effect
The two-component transparent system fully presents natural wood grain; the single-component solid-color version supports light-tone finish tinting, combining fire protection and decoration.
Low-VOC Export-compliant System
VOC≤300 g/L and solids≥85% for lower odor and environmental impact; CE and RoHS certification plus complete foreign-language test documents support domestic and export timber projects.
Technical Parameters
| TFRCWP mixing ratio | A component : B component : clean water = 1.5 : 1 : 1 by volume |
|---|---|
| Pot life | Use the mixed TFRCWP material within 6 hours |
| Recommended dry film | TFRCWP total dry film >=500 um; single-component wood coating recommended dry film 0.8-1.0 mm |
| Drying / curing | TFRCWP surface dry about 4 h and full cure 48 h; single-component wood coating surface dry <=3 h and through dry <=22 h |
| Wood moisture | TFRCWP wood moisture 12%-15%; single-component wood version recommends <=12% |
| Reference standards | GB12441 wood fireproof standard and EN13501 B-class fire-retardant positioning |
Application Fields
Solid wood, plywood, MDF, timber battens, decorative wood panels, indoor timber structures, furniture, hotels, villas and commercial interior wood components.
Product Advantages
Combines intumescent fire protection, waterborne low-odor application, wood-substrate adhesion and export documentation support while keeping decorative timber surfaces practical for commercial interiors.
Construction Instructions
- Clean, dry and sand the wood surface; remove dust, wax, oil and old unstable coatings before application.
- TFRCWP: mix A component, B component and clean water in the specified ratio, rest for 30 minutes, stir again and filter through an 80-mesh screen before brushing or spraying.
- Apply multiple controlled coats. For TFRCWP, each dry film coat is about 250 um and recoating starts after surface dry. Outdoor use must add a weather-resistant / UV topcoat.
Technical Parameters
Technical Parameters
- Application
- Timber buildings, interior wood finishes, furniture, battens, beams and decorative panels
- Performance Rating
- Confirmed by EN 13501 project class and applied film thickness
- Suitable Substrate
- Dry, clean and sanded solid wood, plywood, veneer and timber components
- Recommended System
- Transparent fireproof primer + transparent intumescent finish, with optional clear topcoat
- Product Features
- Clear finish, natural grain retention, fire expansion, water-based formula and indoor decoration suitability
- Certifications
- Project Quotation
- Quoted by project area, film thickness, packaging and destination port
- Sample Support
- Paid samples and document packs available according to project needs
- Packaging Customization
- OEM/ODM color, label, packaging and export document support
Construction Notes
Construction Notes
01
Confirm wood moisture and surface cleanliness first. Remove old coatings, wax, oil and dust.
02
Prepare a sample to check transparency, color change and consumption before brushing or spraying.
03
After drying, inspect clarity, uniformity, film thickness and fire-rating documents.
Related Technical Articles
Related Technical Articles
Related Products
Related Products
Intumescent Fireproof Coating for Steel Structure
Thin-film and thick-film intumescent fireproof coating for steel structures. It expands under fire to form an insulating char layer, supporting 0.5-3 hour fire resistance for industrial plants, stadiums, airports, tunnels and bridges.
Waterborne Epoxy Anticorrosive Paint
Engineering-grade anticorrosive coating system with two-component epoxy formula for steel structures, pipelines and industrial equipment, offering salt-spray resistance, chemical resistance and strong adhesion.
Waterborne Epoxy Floor Paint
Wear-resistant and eco-friendly epoxy floor coating for factories, warehouses, parking garages and laboratories. It supports dust-proof, anti-slip, easy-clean and long service-life flooring.